How to use the drug "Reglon Super": instructions for use

The process of growing certain plants is not always easy, but some difficulties arise at the harvesting stage. Therefore, in order to easily clean the site, experts have developed desiccant preparations - these are tools that help to cope with the most "strong" cultures, drying them in the bud. On one of these desiccants, called "Reglon Super" and will be discussed further.

Description and composition

Herbicide "Reglon" refers to the class of contact desiccants used before harvesting. It effectively destroys the cell membranes of cultures, as a result of which they completely dry out. The main effect on plants is that of the preparation, dikquit, which is a substance that quickly disintegrates when it hits the plant, so that it can be safely used on seed crops and food crops without fear of possible poisoning. The process of artificial "drying" helps control the uniform ripening of crops, which has a positive effect on harvesting: if all plants are at the same stage of maturity, then the technique does not need to be adjusted.

Did you know? The so-called "lemon ants" contain formic acid, which, in fact, is also a herbicide. They kill almost all the green shoots (except Duroia hirsuta) by injecting the substance into their leaves.

Scope of desiccant

Means "Reglon Super" is used for desiccation of a wide variety of crops: sunflower, wheat, flax, beet, potato, rape, pea, as well as industrial and fodder plants. Excellent for the role of herbicide to protect a variety of crops from annual dicotyledonous and cereal weeds.

The benefits of this drug

Despite the presence of a wide selection of desiccants on the modern market, Reglon Super compares favorably with them due to the following advantages:

  • Within 10 minutes after use, the drug will not be washed away by a sudden rain and will be able to effectively continue its work even at a temperature of +28 ° C.
  • With it, the plants ripen faster and more evenly, which means you can clean them in all weather conditions and in the most optimal time.
  • It is one of the fastest drugs of this kind, which allows you to go to the territory after 5-7 days after the processing of crops.
  • Reducing the humidity of the seeds treated with them reduces the cost of the drying process and reduces their loss when harvesting seed material.
  • A positive effect on increasing yields, improving the quality of seeds and preserving oil content.
  • It helps to stop the development and spread of such well-known diseases as gray and white rot of sunflower, late blight of potatoes, etc.
  • Together with cultivated plants, the drug dries and weeds, which facilitates the overall cleaning process.
I think many gardeners will agree that such a list of merits is more than enough to use the specified desiccant "Reglon Super" on its site, it’s not for nothing that this tool has gained wide popularity among the farmers.
Important! When treating green areas with any chemical preparation, even if it is not considered highly hazardous, it is important to protect yourself from its effects. Be sure to use a protective mask, gloves and a change of clothes, which at the end of the procedure should be immediately washed.

Compatibility with other drugs

When processing potato plantations, the combination of the described agent with the Shirlan fungicide is allowed, but mixing with other pesticides (whether fungicides or insecticides) is highly undesirable, which is explained by a mismatch of use. In Reglon Super tank mixes, it can also be combined with ammonium nitrate and / or urea, at the same time drying out plants and fertilizing the soil for future plantings.

Important! The liquid must be periodically stirred during the processing of plants, which will help to ensure uniform distribution of the drug in the water. The finished working solution should always be used within 24 hours after preparation.

The procedure for the preparation of working fluid

Dilute the desiccant should be immediately before spraying the crops, using only pure water to prepare the solution. To begin, pour the liquid in half the tank, then turn on the mixer and add a measured amount of “Reglon” (determined based on the type of culture being processed). After that, add the required amount of liquid (up to the full tank of the sprayer) and mix well.

How to use: instructions for use

Speaking about Reglon Super, as, indeed, about any other preparation, it is impossible to call the uniform norms of substance consumption absolutely for all cultures.

For example, for processing flax, it is enough to use 1 liter of composition per 1 hectare of plantations (the treatment is carried out in the period of browning 85% of heads in the early yellow ripeness phase), while seed crops of potatoes will need 2 liters per 1 hectare (processing is carried out at the end of the formation of tubers and in the process of peeling thickening).

It will be interesting for you to learn about other preparations for plants, such as Switch, Tiovit Jet, Ekosil, Nemabak, Aktofit, Ordan, Kinmiks, Kemira, and Kvadris.
For winter and spring rapeseed, 2-3 liters per 1 ha will be needed, which are used for ripening about 80% of the pods. Clover seed crops are handled with Reglon Super when browning 75-80% of heads, for which 3-4 l of product per hectare is used. When growing soy, the required amount of the drug is 2-3 liters (per 1 hectare), and the treatment of stands is carried out when browning 50-70% of the beans.

Seed and fodder peas are processed 7-10 days before harvesting, for which 2 liters of Reglon is used per 1 ha. Its standards for the use of desiccant exist when it is used for other crops grown:

  • Carrots during full ripeness of seeds (in umbrellas of the second order) and their total mass is not higher than 50% - 2-3 l / ha.
  • 8-10 days before harvesting onions on a turnip - 2-3 l / ha.
  • Forage beans in the period of yellowing of the lower beans and blackening of the hem - 4-5 l / ha.
  • Lupine narrow-leaved and yellow (seed crops) when browning 80% of the beans - 2-3 l / ha.
  • Alfalfa (also seed crops) in the period of russeting 80-90% of the beans - 2-4 l / ha (at a dosage of 4-5 l / ha, which is also allowed, the use of plants for feeding purposes is prohibited).
  • Cabbage testicles when they reach biological ripeness and when seed moisture is not more than 50% - 2-3 l / ha.
  • Sunflower sowing at the beginning of broaching baskets (single spraying) - 2 l / ha.
  • Radish crops during the period of wax ripeness of seeds and their moisture content are not more than 55% - 4-5 l / ha.
After processing crops should wait a certain time before harvesting. So, for flax flax it is 5-6 days, clover - 5-6, sunflower - 4-6, cabbage - 5-10, peas - 7-10, potatoes - 8-10, radish - 10, table beet and fodder beet - 8 days.

Impact speed

Depending on the weather conditions and the physiological state of the crops at the time of processing, as well as similar indicators after it is carried out, the plants are dried within 5-10 days. The final result is also influenced by the concentration of the active substance, that is, if the dosage is not accurately observed, the drug may either work faster or not at all.

Did you know? In carrots, absolutely all its parts are edible: from the root and to the leaf, which can not only be added to soups and salads, but also brewed tea from it.

Term and storage conditions

The drug "Reglon Super" should be stored in a place protected from direct sunlight, and at air temperature not higher than +35 ° C. It is also important that the product be preserved in the original, tightly closed package for no longer than 3 years.

Having studied all the benefits of using Reglon Super, you will certainly come to a positive conclusion regarding the appropriateness of its use in your area.

Watch the video: Ice: Watch Peshawar student confess to using worlds most addictive drug. Nov 11, 2018 (November 2024).